Flanged
Double Hinge
This range is comprised of hinged expansion joints having stainless steel membranes, carbon steel flanges, and a single internal stainless steel sleeve. These expansion joints are designed to permit regular rotation in one plane only by the use of a pair of pins through hinge plates, attached to the flanges. The hinges and pins are designed to restrain the thrust of the expansion joint due to internal pressure. These expansion joints are used in sets of two or three or with gimbal expansion joints.
Data Sheet
Pipe Ends
Double Hinge
This range is comprised of hinged expansion joints having stainless steel membranes, carbon steel pipe ends. These expansion joints are designed to permit regular rotation in one plane only by the use of a pair of pins through hinge plates, attached to the pipe ends. The hinges and pins are designed to restrain the thrust of the expansion joint due to internal pressure. These expansion joints are used in sets of two or three or with gimbal expansion joints.
Data Sheet
If you cannot find a specific product then please call us on 44 (0)1663 748 200
TECHNICAL INFORMATION: Definition of terms | Safety recommendations | Conditions of sale